Hard Ferrite Magnet Disk Ceramic Magnetic Disc

What's Ferrite Magnet?

A ferrite magnet, also known as a Ceramic Magnet, is a type of Permanent Magnet made from a composite of iron oxide and barium or strontium carbonate. It is a hard, brittle material that exhibits high resistance to demagnetization and corrosion. Ferrite magnets have a relatively low magnetic strength compared to other types of magnets, but they are widely used due to their low cost, excellent temperature stability, and resistance to moisture and chemicals. They are commonly found in various applications such as loudspeakers, motors, magnetic separators, and refrigerator magnets.

Is there any way to change its magnetization way of a oriented magnet

Yes, it is possible to change the magnetization of an oriented magnet. This process is known as demagnetization or magnetization reversal. There are several methods to achieve this:

1. Heating: Applying heat to a magnet can disrupt its magnetic alignment and cause it to lose its magnetization. This can be done by heating the magnet above its Curie temperature, which is the temperature at which a magnet loses its magnetic properties.

2. Applying a strong magnetic field in the opposite direction: By subjecting the magnet to a strong magnetic field in the opposite direction to its current magnetization, it can be demagnetized and then magnetized in the new direction.

3. Hammering or mechanical shock: Repeatedly striking or hammering a magnet can disrupt its magnetic alignment and cause it to lose its magnetization. This method is often used for small or weak magnets.

4. Electrical current: Passing an electrical current through a magnet can also change its magnetization. This is known as the magnetostriction effect and is used in some applications to control the magnetization of materials.

It is important to note that changing the magnetization of a magnet can result in a loss of its magnetic properties or a decrease in its overall strength.

The production of ferrite magnet?

The production of ferrite magnets involves several steps, including the preparation of raw materials, mixing and milling, pressing, sintering, and finishing.

1. Raw Material Preparation: The primary raw materials used in ferrite magnet production are iron oxide (Fe2O3) and strontium carbonate (SrCO3) or barium carbonate (BaCO3). These materials are carefully selected and processed to ensure high purity and consistent quality.

2. Mixing and Milling: The iron oxide and carbonate materials are mixed in precise proportions to achieve the desired magnetic properties. The mixture is then milled to a fine powder to ensure uniform distribution of the components.

3. Pressing: The powdered mixture is compacted into the desired shape using hydraulic or mechanical presses. The pressing process applies high pressure to the powder, causing it to adhere and form a solid mass known as a green compact.

4. Sintering: The green compact is then subjected to a high-temperature sintering process, typically in a controlled atmosphere furnace. During sintering, the compact is heated to a temperature below its melting point, allowing the particles to bond together and form a dense, solid structure. The sintering process also helps to enhance the magnetic properties of the material.

5. Finishing: After sintering, the magnet is cooled and undergoes various finishing processes, such as grinding, machining, and surface treatment, to achieve the desired shape, dimensions, and surface quality. The finished magnets may also be magnetized through exposure to a strong magnetic field.

Throughout the production process, strict quality control measures are implemented to ensure that the ferrite magnets meet the required specifications and performance standards.

Related Products:Anisotropic Cylinder Ferrite Magnets, Anisotropic Ferrite Magnet Rotor, Sintered Neodymium Magnet